Scuba Equipment Assembly and Disassembly for the new revised PADI IDC Skill Circuit and the PADI Divemaster Skill circuit. Get the best score for the Scuba Equipment Assembly and Disassembly skill demonstration on your PADI Divemaster Skill Circuit and the PADI IDC Skill Circuit.

Timestamps for key moments in this video:

00:00 Intro
00:17 Check the cylinders numbers
00:37 Check the O-Ring
00:49 Gently give it a burst
01:03 Attach the BCD correctly
01:16 Attach the BCD safety strap
01:48 Attach the regulator
02:15 Connect the LPI
02:43 Attach the alternate air source
03:01 Remember to face the SPG glass down
03:06 Gently open the scuba cylinder
03:23 Check the BCD
04:12 Check the air
04:53 Check the alternate air source
05:12 Streamline your scuba equipment
06:10 Scuba equipment donning
07:00 Scuba equipment disassembly
07:06 Close the tank valve
07:20 Purge both regulators second stages
07:34 Disconnect the Low Pressure Inflator Hose (LPI)
07:44 Unscrew the first stage
07:53 Dry the protection (dust) cap
08:16 Make a loop with the regulator system
08:31 Take off the safety strap
08:39 Remove the BCD from the scuba cylinder
08:49 Organise the scuba gear

Tips for the Scuba Equipment Assembly and Disassembly demonstration skill:

1. Perform it slowly
2. Run through every step first before they do it, never have the scuba diving students do it at the same time. After you showed it then have them do it, step by step.

Useful links:

🤙 Join my PADI IDC Course:

www.saireecottagediving.com/padi-idc-course-koh-ta…

or

www.idckohtaothailand.com/

🤿 Follow my Scuba Diving Tips blog:

www.scubadivingtips.net/

🎥 Check out my other YouTube Channel:

@Scuba Diving Tips
youtube.com/scubadivingtips

🤳 Follow me on Social Media:

👨‍💻 Facebook Page: www.facebook.com/ScubaDivingTips1
🐦 Twitter: www.twitter.com/DivingTips
🐠 Facebook Group: www.facebook.com/groups/ScubaDiving

Did this video help you with your Diving Skills? Then you can give the biggest Thank You by Joining my Channels Membership! Just click on the JOIN button above or click here: youtube.com/channel/UC_zyVA2PpR0FfdHH2BcoTQg/join

I hope that you liked this Scuba Equipment Assembly and Disassembly video for the new PADI IDC Skill Circuit and the PADI Divemaster Skill Circuit. If you have any questions or suggestions then please leave them in the comments below.

Enjoy your Scuba Diving Adventures!

Marcel van den Berg
PADI Platinum Course Director
Sairee Cottage Diving
Koh Tao, Thailand
Email: info@scubadivingtips.net

Disclaimer:
Marcel van den Berg is a certified PADI Divemaster (2007), OWSI (2007), MSDT (2007), IDCSI (2008), Master Instructor (2010), and Course Director since 2011. This video and other video’s on the YouTube Channels: IDC Koh Tao Thailand and Scuba Diving Tips are for general informational purposes only. Always seek the advice of your Local Law, Scuba Diving Training Organisation, RSTC, and/or your scuba diving professional that is legally teaching/guiding you scuba diving whenever you are in doubt, or following a scuba diving course/guide scuba dive under the supervision of a scuba dive professional from any worldwide dive industry recognized scuba dive organization. Marcel (Mario) van den Berg, IDC Koh Tao Thailand, and/or Scuba Diving Tips are not liable or responsible for any advice, trading tips, or any other information, services, or product you obtain through this video or site. Marcel (Mario) van den Berg, IDC Koh Tao Thailand and/or Scuba Diving Tips are not liable or responsible for any injury, financial loss, failing a scuba diving course, and or loss of certification.

#MarcelVanDenBerg #PADI #ScubaDiving

Scuba Equipment Assembly and Disassembly demonstration skil